Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Add Array to User Data Type

Created by: mdarende at: 8/26/2021 2:50 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

8/26/2021 2:50 PM	Rate (0)
mdarende Experienced Member Joined: 2/6/2015 Last visit: 10/25/2024 Posts: 130 Rating: (2)	Hello I am using WinCC Unified V17. I am activly using the User Data Types. But i cannot add an array type variable into the UDT. (For example array of Real values).. Is this not possible in UDT?

Suggestion To thank Quote Answer

8/26/2021 3:05 PM	Rate (0)
HedebyL Regular Member Joined: 6/11/2015 Last visit: 9/30/2024 Posts: 27 Rating: (4)	Hi I can do it. Can you post a snip of the error or the message from TIA?? // Lasse

Suggestion To thank Quote Answer

8/26/2021 3:14 PM	Rate (0)
mdarende Experienced Member Joined: 2/6/2015 Last visit: 10/25/2024 Posts: 130 Rating: (2)	I do not get any error message In the UDT table of WinCC Unified there is no DataType like "Array" that i can select. Perhaps there is another way to add it, but i don't know. (See attachment) Attachment array.png (671 Downloads)

Suggestion To thank Quote Answer

8/30/2021 8:57 AM	Rate (0)
ZickZackTIA Silver Member Joined: 6/22/2017 Last visit: 9/26/2024 Posts: 420 Rating: (57)	UDTs from a PLC can do that. I don't work with HMI UDTs that often.

Suggestion To thank Quote Answer

9/2/2021 2:33 PM	Rate (0)
ro14 Experienced Expert Joined: 6/22/2020 Last visit: 10/16/2024 Posts: 119 Rating: (27)	It's not possible to define arrays in HMI UDTs, but it is possible to define arrays if you define an individual HMI tag as internal tag.
	If this post was helpful, please rate it!
Suggestion To thank Quote Answer

11/21/2022 10:02 AM	Rate (0)
prsthraja1696 Member Joined: 6/30/2018 Last visit: 10/30/2024 Posts: 9 Rating: (0)	Thanks for the Info!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC WinCC Unified

Follow us on