Navigation

RT Unified Tag License calculator?

Created by: SummerSeaSun at: 1/26/2023 9:58 AM (3 Replies)

1/26/2023 9:58 AM	Rate (0)
SummerSeaSun Bronze Member Joined: 2/5/2013 Last visit: 10/14/2024 Posts: 288 Rating: (5)	Dear Sirs, I'm triyng to understand the license method for Unified RT for PC v.18. I.e. if I buy a 150 Tag it means that: - I can have 1000 tag inside project but only 150 can be shown as "active" on runtime? - I can have 150 Tag inside project and shown on the runtime? Thanks, BR

Suggestion To thank Quote Answer

1/26/2023 10:47 AM	Rate (0)
JBS98 Regular Member Joined: 7/19/2022 Last visit: 10/30/2024 Posts: 413 Rating: (70)	Hi SummerSeaSun, The number of tags in runtime that you need translates into all the variables that you use with connection to a PLC. Internal variables are not counted. So if you have 1000 tags in your project you will have to have a higher license and not the 150 tags license. Otherwise you will get a message indicating that you lack license and will go to demo mode.
	If this Information really helps, you could use the Rate function Best Regards, JBS98
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users SummerSeaSun

Joined: 2/5/2013

Last visit: 10/14/2024

Posts: 288

Rating:

(5)

Thanks for the reply, is there a tool to calculate the license needed?

i.e. one RT PC can manage:

- n.3 OPC UA Client connection to PLC

- n.1 OPC UA Server that should manage 30 client

- n.1000 tag logging to Sqlite stlorage

2/8/2023 10:58 AM	Rate (0)
itafusna Silver Member Joined: 2/17/2020 Last visit: 10/31/2024 Posts: 1105 Rating: (200)	Hi SummerSeaSun, I'm afraid there is no specific tool for it. After engineering, when you compile the Unified application (UCP or PC RT) in the TIA Portal project, the system collects and displays the number of used/configured PowerTags in the Inspector window.
	A rating will be well appreciated.
Suggestion To thank Quote Answer

Share this page:

Share this page on...