Navigation
"the OEM version of step 7 OEM was found on your computer"
Created by: AutoGen_9452379 at: 5/6/2023 8:16 PM (1 Replies)
Rating 
Thanks 2
2 Entries
| 5/6/2023 8:16 PM | |
|
Posts: 1 Rating:
|
I am using tia portal v16 and l can't install simatic manager v5.7 .("the OEM version of step 7 OEM was found on your computer") ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 05/08/2023 09:19:19New subject after splitting |
|
| 5/6/2023 10:06 PM | |
Joined: 9/27/2006 Last visit: 12/27/2025 Posts: 12474 Rating:
|
Hello; This conflict message will appear if you have a version of Starter on your PC,Since it is possible to install Starter as a standalone product, it includes a special version of Step 7 (OEM) that will block a new installation of Step 7. Is this the case? Then follow the recommendations from KSN in this discussion: https://support.industry.siemens.com/forum/ca/en/posts/step-7-v5-5-sp1-oem2/154493 Hope this helps, Daniel Chartier |
This contribution was helpful to
|
|
Follow us on