6/5/2023 6:25 AM | |
Joined: 10/11/2006 Last visit: 9/4/2024 Posts: 5902 Rating:
|
Hello, you can run a PositioningAxis only in Speed Mode, too. Then Positioncontroller is activated. It is possible to switch between Speed Mode and Position Mode. 8.1 MC_Power StartMode 8.7 MC_MoveVelocity V7 PositionControlled 8.8 MC_MoveJog PositionControlled ...... .... https://support.industry.siemens.com/cs/ww/en/view/109812057 |
With best regards, |
|
Follow us on