Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

F60062, F60068 on Sinamics DCM

Created by: Omega at: 11/23/2011 10:34 PM (17 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

18 Entries

Entries per page: 10 | all

1/15/2016 12:38 PM	Rate (0)
osman.92.35 Posts: 10 Rating: (0)	yes I have checked the value, r0949 - IN000 - 21
osman.92.35 Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

1/16/2016 11:45 AM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Hello, Please check the field data/compensation data. Manual says unable to read field compensation data. Please refer the attached sheet for more information. HTH. Attachment F60068 fault value .jpg (880 Downloads)

Suggestion To thank Quote Answer

1/18/2016 11:06 AM	Rate (0)
osman.92.35 Posts: 10 Rating: (0)	Hello, Last time, when I turned on the main switch, fault disappeared spontaneously.However,I couldn't identify the problem.If I face the same problem , I will review the attachment you send. Thanks for your interest
osman.92.35 Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

11/25/2019 5:25 AM	Rate (0)
AutoGen_5745349 Member Joined: 7/13/2017 Last visit: 3/9/2022 Posts: 1 Rating: (0)	Здравствуйте. Есть ли решения проблемы? F60068 также встречается на диске.

Suggestion To thank Quote Answer

11/26/2019 8:51 AM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	AutoGen_5745349 Здравствуйте. Есть ли решения проблемы? F60068 также встречается на диске. Translation - Hello. Are there any solutions to the problem? F60068 is also found on disk. Answer - Hello, This forum official language is English, so post your query in English language. Also please open new topic to post your query. Now to your query - please check r0949 value which will help you to find out the cause of problem. Please refer my earlier post where in you will find the details of fault code. HTH. Здравствуйте, Официальный язык этого форума - английский, поэтому оставьте свой запрос на английском языке. Также, пожалуйста, откройте новую тему, чтобы опубликовать свой запрос. Теперь к вашему запросу - пожалуйста, проверьте значение r0949, которое поможет вам выяснить причину проблемы. Пожалуйста, обратитесь к моему предыдущему сообщению, где вы найдете подробную информацию о коде неисправности. НТН.

Suggestion To thank Quote Answer

6/12/2023 7:03 AM	Rate (0)
stylesclash_ajay Regular Member Joined: 12/29/2019 Last visit: 11/8/2024 Posts: 32 Rating: (1)	if you solve pls tell me i am stuck on same problem

Suggestion To thank Quote Answer

6/12/2023 7:15 AM	Rate (0)
stylesclash_ajay Regular Member Joined: 12/29/2019 Last visit: 11/8/2024 Posts: 32 Rating: (1)	pls help me on same problem i am stuck

Suggestion To thank Quote Answer

6/13/2023 8:21 AM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	stylesclash_ajay pls help me on same problem i am stuck Hope you must have read all replies. Did any one reply help you? If not please provide detail information of your problem.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_DCM

Follow us on