Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Troubles to download the configuration from a PCS7 ES/OS to an OS

Created by: Infinit5000 at: 5/11/2021 1:02 AM (5 Replies)

Rating (0)

Thanks 5

6 Entries

5/11/2021 1:02 AM	Rate (0)
Infinit5000 Regular Member Joined: 9/9/2019 Last visit: 11/2/2023 Posts: 18 Rating: (0)	Hi Experts... I'm having some troubles trying to download the configuration from a PCS7 ES/OS (SIMATIC RACK PC) to an OS (SIMATIC BOX PC) I can ping between them over TerminalBUS an also do a remote desktop sesion between them so that means that the network is ok and working (I think) I've already deactivate all the firewall protections Nevetheless I got this error while trying to download the configuration from the netpro, and also from the HW config I already import the .xdb file to configure the station (trough a windows network shared folder [The station configurator editor is online mode already]) What else can I do ? Thanks you a lot, nice day ------------------------------------------------------------------------------------------ Split from SIMATIC PC station configuration downloading error. Attachment OS Download.png (469 Downloads)
	Last edited by: Jen_Moderator at: 05/11/2021 10:40:36 New subject after splitting
Suggestion To thank Quote Answer

5/11/2021 9:07 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi From the screen shot you have shared, You seem to have WinCC application in both ES and OS PC station? Am i correct. You need to have WinCC reference and take the ES - Wincc as reference. If you do this you can have the changes in ES -winCC and download the changes to OS wincc any time sitting on the ES system. then you can compile the OS PC from ES system. ---------------------------------------------------------------------- Below short cut, is not the recommended way..... In your case, You have successfully imported the XDB file, Then copy the WinCC project from ES and paste it in OS system, open the winCC project, You will have to change the PC name and then put it on runtime.....It should work. Hope this helps.....
	Jazz
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Infinit5000

5/12/2021 7:16 AM	Rate (0)
Heisenberg2 Gold Member Joined: 5/3/2017 Last visit: 5/21/2024 Posts: 673 Rating: (217)	Hi Infinit5000, I guess that you configure the wrong network adapter in SIMATIC Shell (for more information see the FAQ How do you use the SIMATIC shell to configure the terminal bus of a WinCC station?). In addition to the FAQ if you can't find the entry SIMATIC Shell in the Windows Explorer you have to edit the "View > Navigation Plane > Show all folders". With regards Heisenberg Attachment Display_SIMATIC_Shell.png (570 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Infinit5000

5/12/2021 11:43 AM	Rate (0)
Oreca Platinum Expert Joined: 3/14/2008 Last visit: 11/11/2024 Posts: 2126 Rating: (951)	If you have configured via PLC->Configure, then download the NetPro configuration of the station so the whole configuration is known to the PC station. Then execute PLC>Download
	If I could help you, you can use the RATE button. Thank you. Prospact Netherlands...your PCS7 and PCS neo Expert Topic: PCS7 Complete Overview
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Infinit5000

5/13/2021 1:48 AM	Rate (0)
Infinit5000 Regular Member Joined: 9/9/2019 Last visit: 11/2/2023 Posts: 18 Rating: (0)	Hi everyone... I think I need to explain something; the architecture we are using its not such conventional... I mean we are using just two computers, one as ES/OS single station and another one as OS single station so we know we're not gonna be able to directly update from ES/OS the .pdls we modify or change and we're gonna need to copy paste them Why we're using this architecture?... client desition; (I dont know why) Update from my problem... I've already download from "PLC->Download" So next I need to do It's to mirroring the OS... anyone have some suggestion about that ? BTW... the problem where solved changing the configuration of both TerminalBUS adaptar without the SIMATIC Shell but whitin the SIMATIC MANAGER > HWConfig Thanks to all of you for your advices

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Heisenberg2 mrsyaidi

6/15/2023 9:05 AM	Rate (0)
mrsyaidi Joined: 9/8/2022 Last visit: 10/5/2023 Posts: 1 Rating: (0)	Hi Infinit5000, I faced the same issue currently as your posting. How did you manage to solve the troubled to download the configuration from ES/OS to OS ?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on