Navigation

V20 free run to stop

Created by: Masood_Es at: 8/29/2023 11:22 AM (1 Replies)

8/29/2023 11:22 AM	Rate (0)
Masood_Es Experienced Member Joined: 9/8/2015 Last visit: 10/20/2024 Posts: 116 Rating: (1)	Hi friends I want to use the v20 1.5KW drive with the following conditions: 1- Start the motor with ramp by activating the first input 2- When the first input is cut off, the motor will shut down without control. Without a ramp and similar to a situation where the electricity is completely cut off 3- When the motor is on, by activating (or deactivating) the second input, the motor should be stopped immediately using the DC brake. No ramp I have done this before with Drive LS. I want to replace it with v20 Please help to set the parameters

Suggestion To thank Quote Answer

8/30/2023 8:55 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello Masood_Es, see parameters p0843 and p0701=5 in the V20 operating instruction manual to control V20 with ON/OFF2 with digital input. https://support.industry.siemens.com/cs/ww/en/view/109811111 See chapter 5.6.2.5 of the operating instruction manual for the available braking functions, DC braking sequence 2 is maybe the function you are looking for.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Masood_Es