9/8/2023 5:54 PM | |
Joined: 1/9/2019 Last visit: 5/1/2024 Posts: 1 Rating: (0) |
Hi PISCEAN , i have a issue with Feed for one of the axis. from the PLC i checked DB53.dbb0 has the value for the feedrate DB53.dbx4.6 and 4.7 turns on when i want to Jog Plus and Minus But the status bits DB53.dbx64.6 and 64.7 doesnt turn ON, so i m not able to find the cause i can jog other axis without any issue Thanks in Advance ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 09/11/2023 10:29:30New subject after splitting |
|
Follow us on