Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Configuration I/O adress in CFC

Created by: don111 at: 9/21/2023 11:20 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/21/2023 11:20 AM	Rate (0)
don111 Member Joined: 12/4/2021 Last visit: 5/1/2024 Posts: 2 Rating: (0)	Hello I have a poroblem to connect I/O adress between CPU 555 and SM DI/DO, AI/AO models. How can I control and confugrate these signals in CFC chart, I cant connect adresses. Please help me with full details Attachment Signal.JPG (543 Downloads)

Suggestion To thank Quote Answer

9/21/2023 11:38 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. For SM500 IO you should use FB's from 'I/O FB' folder. BII8, BIQ8, SBI, SBQ for DI/DO. ADC, DAC for AI/AO. You need not use $-signals.

Suggestion To thank Quote Answer

9/21/2023 12:43 PM	Rate (0)
don111 Member Joined: 12/4/2021 Last visit: 5/1/2024 Posts: 2 Rating: (0)	How to enter correct addresses in HW, Please give me some optimal instruction or manual Attachment Signal2.JPG (482 Downloads)

Suggestion To thank Quote Answer

9/22/2023 3:32 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Open HWConfig, open properties of SM500, goto Addresses tab. Enter your symbol names of IO's or press Preallocate button. Then use these names in CFC in drop-down list when clicking Interconnection to Address. Attachment screen.zip (410 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on