Hello,

It seems that i have the same error A13000 (Licence not adequate)2,on the CU250S please tell me how you solve this problem?

Thank you!

------------------------------------------------------------------------------------------
Split from License not adequate.

AutoGen_681742

Hi, yes this card was a 4.7 but is 'upgraded' to 4.8 due to we use the Startdrive Option software in TIA v14. By this we could use a CU320-2 PN together with TO.

But now, we have extended the drives from 4 to 6 and we now use 4 of them with safety and what i understand the limit is 3 axes with safety if you have a card without the perfomance package.

I also got the error A13000 with 0 as alarm value.

 Hello,

Please tell how you solve with error A13000?

Thank you very much!

Please don't post multiple for the same problem.

You post your problem also in this topic:

Activating a license key

Ok, sorry

Closed cause question posted twice.

The second thread with the subject Error A13000 is published within the conference SINAMICS G.