Navigation

Want to make a user in WINCC user administrator

Created by: MAA_11023 at: 12/11/2023 8:00 PM (1 Replies)

12/11/2023 8:00 PM	Rate (0)
MAA_11023 Member Joined: 4/14/2022 Last visit: 10/14/2024 Posts: 5 Rating: (0)	Hi Experts, I am using PCS7 V9.1 SP2.I want to make a user in WINCC user administrator which can not do the "Bypass" of any value or signal. I have tried unauthorized "Process controlling", "Higher Process controlling" and "Highest Process controlling" and other one by one but not succeed to make unavailable "Bypass" button as shown in attachment I want make unavailable Simulation and Bypass both for a user but unfortunately i can not do this for by pass as shown in picture(attachment) Please support. ------------------------------------------------------------------------------------------ Split from User Administrator. Attachment 1.jpg (239 Downloads)
	Last edited by: The Helping Hand at: 12/12/2023 09:47:51 New subject after splitting "through patience, great thing are accomplish"
Suggestion To thank Quote Answer

12/15/2023 12:49 PM	Rate (0)
Murof Platinum Member Joined: 8/3/2009 Last visit: 11/11/2024 Posts: 14143 Rating: (1771)	Hello MAA_11023 you can dynamise the "Operation" property with a Script and use the @currentUser as trigger -> then you can use the Standardfunctions to check if the loged in user has the permission to control this button or not (PASSCheckXXXXPermission) Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer