Which safety block can we use ?

Hello Experts, 

Similar Scenario, In our project we are using 2 way selector switch for Production and Manual mode . I am using 2 Safety Inputs for this. Regarding this Safety Inputs which safety block  we can use ? 
I am using E-Stop Block. Any other suggestions Please guide me. 

Thanks in advance !

Regards, 
Vijay

------------------------------------------------------------------------------------------
Split from Safety Block for S71500 - 3 KEY SWITCH.

Vijay Vee

Similar Scenario, In our project we are using 2 way selector switch for Production and Manual mode . I am using 2 Safety Inputs for this. Regarding this Safety Inputs which safety block  we can use ? 
I am using E-Stop Block. Any other suggestions Please guide me.

 Why have you selected to use safety inputs to select between manual and automatic mode control? There is no standard blocks for this kind of functionality, since the safety program is not the correct place to control machine states.

Hello Hati,

Customer Requirement to use selector key for the modes(Production/Manual). through the selector key they can able to change the modes, with out key they can't change the mode.For this we are using safety inputs.(1 NO Input and 1 NC Output). So I configured as 1oo2 evaluation Non Equivalent and used ESTOP1 Block. I am not sure this information may be useful for someone

Regards,

Vijay