Compatibility of Windows 10 pro 1903 with TIA V15.1 & SIMATIC 5.6

Hello everyone,

compatibility list from the siemens site doesn't mention 1903 version of windows for both softwares. Has anyone successfully installed both TIA V15.1 & SIMATIC 5.6 in 1903 version?

Also, if i buy 1903 version and the installation has problems, is it possible to downgrade it to 1803?

Hi,

this configuration is running here without any problem.

If youbuy a 1903 Windows you can't roll back to 1803.

regards

Christoph

I have certain problems starting Plcsim Advanced v2.0 SP1 after upgrading Windows to 1809.

Otherwise, Tia Portal v15.1 and Step 7 v5.6 work fine.

ChristophD

Hi,

this configuration is running here without any problem.

If youbuy a 1903 Windows you can't roll back to 1803.

regards

Christoph

 Thank you very much Christoph.

both tia 15.1 & simatic 5.6 don't require any update even?

Hello @draacula,

I have been running the last Siemens SW (Tia 15.1 upd4, Startdrive 15.1 Upd3, Simocode 15.1 Upd2 and Wincc 15.1 Upd 4 in a W10 1903 version.

At first everything looked fine but I started noticing weird behaviour and TIA Portal crashed unexpectedly many times.

I had the next failures:

- Not being able to save the project when having simulated with RT,

- Not being able to save the project randomly,

- Not being able to simulate with PC Simulator unless I restart the computer,

- Not being able to close the WinCC RT (which crashed and made TIA Portal uusable,

- others that I do not remember

This is why I installed 1809 and it is what I recommend. Since then, many errors (not all) have disapeared.

draacula

Hello everyone,

compatibility list from the siemens site doesn't mention 1903 version of windows for both softwares. Has anyone successfully installed both TIA V15.1 & SIMATIC 5.6 in 1903 version?

Also, if i buy 1903 version and the installation has problems, is it possible to downgrade it to 1803?

 I had a Windows 10 - 1903 installed and installed 1809 with no problems. As of now, it is what I recommend to use TIA Portal until they release new updates

ChristophD

Hi,

this configuration is running here without any problem.

If youbuy a 1903 Windows you can't roll back to 1803.

regards

Christoph

 So can i know whether Windows 10 professional 1903 works with Tia portalv15.1 comfort/advanced/professional or should i use TIA portal only with Windows 10 professional 1803.

Jorge KW

 I had a Windows 10 - 1903 installed and installed 1809 with no problems. As of now, it is what I recommend to use TIA Portal until they release new updates

ChristophD

Hi,

this configuration is running here without any problem.

If youbuy a 1903 Windows you can't roll back to 1803.

regards

Christoph

 

arunvt1992

 So can i know whether Windows 10 professional 1903 works with Tia portalv15.1 comfort/advanced/professional or should i use TIA portal only with Windows 10 professional 1803.

Jorge KW

 I had a Windows 10 - 1903 installed and installed 1809 with no problems. As of now, it is what I recommend to use TIA Portal until they release new updates

ChristophD

Hi,

this configuration is running here without any problem.

If youbuy a 1903 Windows you can't roll back to 1803.

regards

Christoph

 

 

 Build 1903 is compatible with TIA 15.1

ChristophD

Hi,

this configuration is running here without any problem.

If youbuy a 1903 Windows you can't roll back to 1803.

regards

Christoph

 Hello， I want to install the portal v15.1 software, do you know the software download address?

JackTan

 Hello， I want to install the portal v15.1 software, do you know the software download address?

 SIMATIC STEP 7 and WinCC V15.1 TRIAL Download

Page down to the section that has the downloads (see picture). The program is defragmented, so you will need to get all the files -- for at least disk 1.

Note that you need to be registered for making download.
You will get a prompt if your account has not been activated yet.