FB Absolute Encoder Adjustement V90PN

I am using FB absolute encoder adjustment block in Tia Portal V16 to Set my Absolute encoder of V90 Servo Using S7-1214CPU.

Function block works Fine by performing the triggering action of execute input twice.

Can any one comment on this.

Note:Output Status of the Done bit is always False it is not becoming to True.

Can Technology Team comment on the above statement

Can Technology Team comment on the above statement

Since the output Done bool is only true for 1 PLC scan, you may want to capture the done bit becoming true using an INC instruction.

INC1 to increment some tag's value by 1 any time the Done bit is true.

That way, you can see each time the Done bit became true even without actually seeing it happen - which you will virtually never see while monitoring online.

JVP1911

I am using FB absolute encoder adjustment block in Tia Portal V16 to Set my Absolute encoder of V90 Servo Using S7-1214CPU.

Function block works Fine by performing the triggering action of execute input twice.

Can any one comment on this.

Note:Output Status of the Done bit is always False it is not becoming to True.