Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

where from i can get hmi software for 802c and 802d model ?

Created by: m j industrial electronics at: 3/15/2013 7:24 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

3/15/2013 7:24 PM	Rate (0)
m j industrial el... Posts: 5 Rating: (0)	aslamo alakum. dear; i have some machines .which used control all seimens sinumerik 802c and 802d and uses simudrive 611. i have software for download ladder but i want hmi software for upload and download data registers its model.as comunicat hmi to ladder program.pleas help me where from i can get hmi software for 802c and 802d model ???? and what is name of software Attachment jamil.jpg (430 Downloads)
m j industrial el... Posts: 5 Rating: (0)	Last edited by: O_Moderator at: 3/18/2013 10:02 AM new subject after spliting from /tf/WW/en/Posts/16839#top
Suggestion To thank Quote Answer

3/16/2013 4:48 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, You don't have any kind of HMI software for uploading your HMI informations.... for your 802C and 802D you need to have the software tools like WINPCIN--> this can upload and download the informations like (NC,PLC,HMI) Simocomu --> this can upload and download the informations like (Drives) PLC programming tool--> PLC project upload and download as well... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

3/19/2013 9:06 PM	Rate (0)
m j industrial el... Posts: 5 Rating: (0)	DEAR.MR/MRS, I have CK6140 cnc lath machin. i have up loaded its ladder file. ladder file is all ok. but my screen has gone at default position. and language has too changed. i want file of screen which can communicate with ladder programm for cnc lath machine model ck6140. our countrol system is sinumarik 802c . VERSION 04.02.04 . PLEASE send me update file .
m j industrial el... Posts: 5 Rating: (0)	Last edited by: m j industrial electronics at: 3/19/2013 9:29 PM
Suggestion To thank Quote Answer

3/20/2013 4:44 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, You need to have the machine backup files....please check it from your machine manufacturer. If the screen is showing default....you need to load your machine backups then only it will be in the healthy state Check it out.. Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users m j industrial el...

4/2/2024 11:28 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by U_59351d29-e313-47b5-b858-1a22f744456a is split to a separate thread with the subject Where can I find the button to increase the brightness or contrast? . Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on