12/16/2022 3:10 PM | |
Joined: 4/8/2021 Last visit: 5/14/2024 Posts: 638 Rating: (101) |
Hi tesi, Have a look at this post. It explains how parameter set works and how to controll it from the PLC I would also check the WinCC Unified manual for more information https://support.industry.siemens.com/cs/ww/en/view/109813308/160987876875 Hope it helps. |
Best regards, |
|
4/3/2024 3:11 AM | |
Joined: 11/14/2023 Last visit: 4/3/2024 Posts: 1 Rating: (0) |
Uncheck it and it will work |
Follow us on