Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ET200SP BASIS A0, A1

Created by: Juan de Via at: 12/1/2014 4:07 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

12/1/2014 4:07 PM	Rate (0)
Juan de Via Posts: 28 Rating: (0)	what is the diference betwen basis from A0 to basis from A1 there is any where a table that show what basis is apropied to what card? thank you Juan
Juan de Via Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

12/4/2014 8:22 AM	Rate (0)
Pittiplatsch Posts: 1368 Rating: (127)	Hello, have a look here http://support.automation.siemens.com/WW/view/de/59753521/0/en this is a manual only for the BaseUnits of the ET200SP
Pittiplatsch Posts: 1368 Rating: (127)
Suggestion To thank Quote Answer

5/14/2024 12:42 PM	Rate (0)
U_69514ea0-de1c-4... Joined: 5/14/2024 Last visit: 5/14/2024 Posts: 1 Rating: (0)	A1 WITHOUT AUXILIARY TERMINALS A0 WITH AUXILIARY TERMINALS
	Last edited by: U_12bd34b2-b8f7-4b65-8d20-bad4f0d55d7d at: 05/14/2024 12:42:27 Last edited by: U_12bd34b2-b8f7-4b65-8d20-bad4f0d55d7d at: 05/14/2024 12:43:20
Suggestion To thank Quote Answer

5/17/2024 6:06 AM	Rate (0)
sancruz Gold Member Joined: 3/11/2019 Last visit: 11/8/2024 Posts: 1653 Rating: (305)	Hi, auxiliary terminals has nothing to do with A1 oder A0. Both, A1 as well as A0 are available as versions with, or without auxiliary terminals. Both, A1 as well as A0 are available as versions "white" or "grey" BaseUnit. An overview can be found in the manual already posted above. The most significant difference: A1 has an internal temperature sensor which can be used as reference junction in combination with analog inputs connected thermo couples. This enables you to use "internal reference" for the thermo couple. A0 does not have this internal temperature sensor. regards sancruz
	Feedback appreciated, please rate
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_5049387

|

Share this page:

Share this page on...

Follow us on