6/26/2024 11:38 AM | |
Joined: 8/3/2009 Last visit: 8/14/2024 Posts: 13547 Rating:
|
Hello The PT If you work with profisafe then something in the PLC Blocks seems not correct. check the appkicationexample: https://support.industry.siemens.com/cs/de/en/view/103497649 And you have to do the configuration of the safety type with every panel on every box. Bye Murof |
Last edited by: Murof at: 06/26/2024 11:39:02If this Information really helps, you could use the Rate function |
|
This contribution was helpful to
1 thankful Users |
Follow us on