Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with Connect Sm1231 RTD

Created by: Gardenov94 at: 7/31/2024 6:18 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

7/31/2024 6:18 AM	Rate (0)
Gardenov94 Posts: 3 Rating: (0)	Hello Today I tried to connect the RTD analog input module (6es7 231-5pd32-0xb0) to my CPU 1214C. When i równoległe new hardware this new module is not reachable …. And i don’t know why my system not are him Attachment image0.jpeg (237 Downloads)
Gardenov94 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

7/31/2024 7:55 AM	Rate (0)
sancruz Gold Member Joined: 3/11/2019 Last visit: 11/8/2024 Posts: 1653 Rating: (305)	Hi, Gardenov94 When i równoległe new hardware this new module is not reachable …. And i don’t know why my system not are him can you please translate this into english? Does this mean "download"? So have you already transfered the new HW config to the CPU? Furthermore: Please add a screenshot from the module diagnostics of the SM1231RTD Please add the diagnostics buffer of the CPU as .txt file regards sancruz
	Feedback appreciated, please rate
Suggestion To thank Quote Answer

7/31/2024 10:23 AM	Rate (0)
Gardenov94 Posts: 3 Rating: (0)	Yes i send new cofnij HW to CPU. in diagnostic buffer SM1231 i have only information : not reachable Attachment image0.jpeg (235 Downloads)
Gardenov94 Posts: 3 Rating: (0)	Last edited by: Gardenov94 at: 07/31/2024 10:36:02
Suggestion To thank Quote Answer

7/31/2024 10:50 AM	Rate (0)
Gardenov94 Posts: 3 Rating: (0)	Ok, i solved this problem. I reset CPU to factory settings and add new device and use fucntion detected HW.
Gardenov94 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users sancruz

|

Share this page:

Share this page on...

Follow us on