Industry Online Support
Technical Forum
Navigation
Error: Acceptance test required (1000). Looping on this error.
Created by: HBCM_ at: 1/16/2023 11:33 AM (1 Replies)
Rating 
Thanks 1
2 Entries
| 1/16/2023 11:33 AM | |
Joined: 10/25/2019 Last visit: 5/20/2024 Posts: 278 Rating:
|
Hello everyone, faced with an issue, it looks similarly to this one. HW:
There's an error 1650 on both CU and Drive: Acceptance test reqiured (1000), but performance of the test is interferred with the same error 1650. In other words to make any movement (achive setpoint) within the acceptance test scopes is not possible due to drive blockage by the error: 1650. Any thoughts upon this matter will be appreciated. update: solved. |
Last edited by: HBCM_ at: 01/16/2023 11:34:44Last edited by: HBCM_ at: 01/17/2023 13:49:01 |
|
This contribution was helpful to
|
|
| 8/6/2024 8:29 PM | |
Joined: 4/4/2024 Last visit: 11/13/2024 Posts: 1 Rating:
|
Solved... Your contribution would be appreciated, please share the solution; i have the same problem and I cannot come out from this circle. Thanks.
|
Follow us on