Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PN: Clock synchronous operation, clock cycle failure

Created by: elzer.otomasyon1 at: 9/10/2024 5:13 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/10/2024 5:13 PM	Rate (0)
elzer.otomasyon1 Member Joined: 10/15/2020 Last visit: 11/19/2024 Posts: 4 Rating: (0)	HELLO Hello good day I am trying to drive S210 (6SL3210-5HE15-0UF0) Servo with S71500 (6ES7 515-2TM01-0AB0). The program was previously written with TIA V17 and v90 servos. I converted the program to TIA V18 and added S210 servo instead of V90. But while the machine is running or stopped, the servos give F09 communication error every 5-10 minutes. Attachment 0.png (98 Downloads)

Suggestion To thank

9/11/2024 11:54 AM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 11/19/2024 Posts: 1024 Rating: (14)	Closed cause question posted twice. The second thread with the subject S210: F09 communication error is published within the conference SINAMICS S Best regards, Wit_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on