Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
2 Entries
| 9/10/2024 5:05 PM | |
Joined: 10/15/2020 Last visit: 11/19/2024 Posts: 4 Rating:
|
HELLO I am trying to drive S210 (6SL3210-5HE15-0UF0) servo with S71500 (6ES7 515-2TM01-0AB0). The program was previously written with TIA V17 and v90 servos. I converted the program to TIA V18 and added S210 servo instead of V90. But while the machine is running or stopped, the servos give F09 communication error every 5-10 minutes. ------------------------------------------------------------------------------------------ |
Last edited by: Wit_Moderator at: 09/11/2024 11:47:38New subject after splitting |
|
| 9/11/2024 12:19 PM | |
|
Posts: 50 Rating:
|
Hello, please have a look at following FAQ: https://support.industry.siemens.com/cs/ww/en/view/109820584 Best regards TechSupport for SINAMICS S210 |
Follow us on