Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1200 OPC UA

Created by: AutoGen_9936521 at: 9/12/2024 7:01 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

9/12/2024 7:01 AM	Rate (0)
AutoGen_9936521 Joined: 9/11/2024 Last visit: 9/13/2024 Posts: 2 Rating: (0)	Hello! I wanted to deploy an OPC UA server on S71200, but I encountered an error when loading the program into the PLC. TIA Portal V16 update 4 ThePLC 1214C DC/DC/DC 6ES7214-1AG400XB0 V4.5.1 PLC project firmware V4.4 When configuring the OPC UA properties, everything is clear and the program is loaded into the PLC, but as soon as I create the Server interface and add data there, the programc rashes when loaded into the PLC (see attachment) Attachment Screenshot_1.png (88 Downloads)

Suggestion To thank Quote Answer

9/12/2024 11:10 AM	Rate (0)
AutoGen_9936521 Joined: 9/11/2024 Last visit: 9/13/2024 Posts: 2 Rating: (0)	Maybe you have tried to do this, tell us about your experience. It will help me a lot too, thank you.

Suggestion To thank Quote Answer

9/12/2024 1:27 PM	Rate (0)
Mr.Silver Silver Member Joined: 9/11/2019 Last visit: 11/19/2024 Posts: 13 Rating: (0)	Hello guys! Look on this :https://support.industry.siemens.com/cs/ww/en/view/109971630 Best regards!
	Last edited by: Wit_Moderator at: 09/13/2024 10:55:17 Link optimized
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_9936521

|

Share this page:

Share this page on...

Follow us on