Industry Online Support
Technical Forum
8/14/2009 12:13 AM | |
Joined: 5/4/2009 Last visit: 4/30/2024 Posts: 914 Rating: (40) |
Dear Danfenton... Have you ever put that output in "Force" status? Have luck. Tomy the Master. |
Aim Higher |
|
8/14/2009 9:10 AM | |
Posts: 217 Rating: (52) |
Hello, Do you using mb10, mw10, or md 10 in any ware in the program? If so that might be the problem. Best regards, |
8/14/2009 10:09 PM | |
Posts: 191 Rating: (58) |
Hi!! you can reset your outputs at the first scan cycle of the PLC using SM0.1 ROSA |
Follow us on