Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Teleservice Modem Selective Communication...

Created by: TechnoDude at: 11/11/2005 1:26 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/11/2005 1:26 PM	Rate (0)
TechnoDude Posts: 47 Rating: (1)	I have a TS adapter on a 413-2DP. The phone line is good and this connection has been used many times. The problem is that only one modem (US Robotics 0668) on the calling end will establish communication with the TS adapter. Various notebook modems and even other USR modems will not correctly "identify adapter" when trying to make a connection. Is there a list of compatible modems, or instruction on how to correct this issue. The "troubleshooting" section for the TS adapter does not cover this. Thanks!
TechnoDude Posts: 47 Rating: (1)
Suggestion To thank Quote Answer

11/11/2005 7:02 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Did you already controlled the initialization string of the TS adapter? See Manual: http://support.automation.siemens.com/WW/view/en/15220172 chapter 4.4.2 sheet: 4-17
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/21/2005 4:06 PM	Rate (0)
AllenBradleyLover... Posts: 1 Rating: (0)	Yes...the modem was configured and was used a number of times successfully...until the calling modem was changed. Now it will no longer connect.
AllenBradleyLover... Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/10/2006 6:34 PM	Rate (0)
TechnoDude Posts: 47 Rating: (1)	Problem turned out to be with Dell notebook modem[:(]. Some Dell modems don't get along very well with Teleservice adapters. Using an external "BOCA" modem or US Robotics successfully.
TechnoDude Posts: 47 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on