Navigation

Transfering project to OP77B through USB

Created by: Import-User-1 at: 9/5/2005 2:33 PM (2 Replies)

9/5/2005 2:33 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	New standard lap tops do not have COM ports anymore instead the have USB ports. Using a USB/COM converter doesn´t work since WInCCFlexible cannot recognize the virtual port. According to OP77B manual we need a host-to-host USB cable. Has anybody tried this? Can you recommend a supplier for this cable? Regards Nestor Guzman
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

Joined: 8/10/2005

Last visit: 4/9/2024

Posts: 1486

Rating:

(32)

Recommended USB Master-Master cables for configuration downloading to a Windows CE Panel in following FAQ:
http://support.automation.siemens.com/WW/view/en/19142034

link edited

9/5/2005 2:34 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Problem solved. We used a cable manufactured by BAFO Model BF100C. However, you must be careful with the driver. The cable only works when you use the driver than comes in the WinCC Flexible Disc 2.
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

Share this page:

Share this page on...