SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

PLCSIM AND 4 PLC CONNECTED VIA PROFIBUS

10/13/2010 2:18 PM	Rate (0)
FABIO66 Posts: 34 Rating: (0)	Hi friend's i use step 7 v5.4 and plcsim v5.4 sp2. I have a follow configuration : 1 cpu 315 2dp master 3 cpu 314 C 2 dp slave the communication between plc are already tested, and work. Now my customer ask to me a modify I wold like to test this modification before send to my customer a modified project. I'm in italy and the plant is in russian..... In my office i don't have a complete hardware, but only a cpu 315. Whit plcsim can i simulate the complete system ? If yes , how can i do ? I have tryed to download but is possible to download only 1 cpu . thank you to all
FABIO66 Posts: 34 Rating: (0)
Suggestion To thank Quote Answer

10/13/2010 3:22 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	FABIO66 Hi friend's i use step 7 v5.4 and plcsim v5.4 sp2. I have a follow configuration : 1 cpu 315 2dp master 3 cpu 314 C 2 dp slave the communication between plc are already tested, and work. Now my customer ask to me a modify I wold like to test this modification before send to my customer a modified project. I'm in italy and the plant is in russian..... In my office i don't have a complete hardware, but only a cpu 315. Whit plcsim can i simulate the complete system ? If yes , how can i do ? I have tryed to download but is possible to download only 1 cpu . thank you to all HI FABIO66, S7-PLCSIM V5.4 SP3 to simulate multiple CPU modules simultaneously in a STEP 7 project and establish communication between the CPU modules. The following communication blocks are supported for communication: SFB8 "USEND" SFB9 "URCV" SFB12 "BSEND" SFB13 "BRCV" SFB15 "PUT" SFB14 "GET" SFB19 "START" SFB 20 "STOP" SFB 22 "STATUS" SFB 23 "USTATUS" Here is the Link for More Detail It will Not Support the other than this block. Here is the Link for the PLCSIM V5.4 SP3 Here is the Link for the PLCSIM V5.4 SP4
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer