Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Configure SSI Encoder on FM 458

Created by: NRodriguez at: 3/22/2011 2:41 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/22/2011 2:41 AM	Rate (0)
NRodriguez Posts: 6 Rating: (0)	Hello, I need help, Currently I work with a FM 458Module, i have 2 SSI encoder, the datasheet is attach. The configuration that I use: RPT 4096 NOT 2048 PZB 0 ABP 24 MDF 1 MDT 0 MDC 1 ENP 0 NFG 1.0 NFP 360 NFY 1 LU 6000 I want know if this configuration is correct? The encoder is BMA 0G24F4096 Thanks you Attachment en_E_3DG_BMA_BMB_SSI.pdf (277 Downloads)
NRodriguez Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

3/22/2011 6:28 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. From data sheet I see that you are using 24-bit multiturn encoder.It have 4096 pulses per turn (12-bits, 2^12)and max. 4096 turns (also 12-bits, 2^12). I this case NOT=4096. Why you set ABP=24? From specification I didn't see, that encoder have alarm bit.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on