Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

2 SPINDLE DISPLAY IN 802D SL

Created by: hardik_vmservices at: 3/15/2011 9:10 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/15/2011 9:10 AM	Rate (0)
hardik_vmservices Regular Member Joined: 5/25/2009 Last visit: 7/3/2024 Posts: 32 Rating: (1)	I WOULD LIKE TO KNOW HOW TO DISPLAY 2 SPINDLE AT SINGLE DISPLAY. I AM SEEN 2 SPINDLE IN SINGLE DISPLAY IN SURFACE GRINDER PACKAGE. PLEASE ANYBODY KNOW THEN REPLAY............

Suggestion To thank Quote Answer

3/18/2011 11:20 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, Check this link..... /tf/WW/en/Posts/46326#top In display MD check this parameter for the spindle MD362 and MD364 for the second spindle Check it out.... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

3/28/2011 8:04 AM	Rate (0)
hardik_vmservices Regular Member Joined: 5/25/2009 Last visit: 7/3/2024 Posts: 32 Rating: (1)	sorry sir, i do that but at a machine position one spindle display in 1 time. i have required two spindle display at same time.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on