Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Turning cycles

Created by: basarte8 at: 12/12/2006 2:57 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

12/12/2006 2:57 PM	Rate (0)
basarte8 Regular Member Joined: 12/12/2006 Last visit: 9/21/2023 Posts: 21 Rating: (0)	Help me! In a vertical turning machine how can I change in the help graphics of the turning cycles the name of the axis. Usually you can see the diameter is X axis and the depth is Z axis. We need rename them by Z axis and Y axis respectively.

Suggestion To thank

12/13/2006 11:56 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, which System are You using?? WinCC, WinCC flexible, Protool or whatever??
April Posts: 1776 Rating: (95)
Suggestion To thank

12/13/2006 12:11 PM	Rate (0)
basarte8 Regular Member Joined: 12/12/2006 Last visit: 9/21/2023 Posts: 21 Rating: (0)	We don't use nor WinCC neither ProTool. The graphics are the standard of Siemens cycles.

Suggestion To thank

12/13/2006 5:14 PM	Rate (0)
shanny Posts: 44 Rating: (0)	HI, Is this running on a CNC system e.g. 840D. If so try reposting in the CNC and Sinumerik forums shanny
shanny Posts: 44 Rating: (0)
Suggestion To thank

12/13/2006 9:25 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/19/2024 Posts: 4114 Rating: (195)	This thread will closed. The question was inserted in conference "SINUMERIK CNC automation systems" once more: Turning cycles.
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on