6/24/2011 4:10 PM | |
Joined: 3/2/2011 Last visit: 7/19/2024 Posts: 5 Rating:
|
Device is Danfoss ECL APEX 20 and they dont haveany GSD . |
6/27/2011 10:25 PM | |
Joined: 9/27/2006 Last visit: 9/10/2024 Posts: 12282 Rating:
|
Hello aurel; Possibly this information could be useful to you: http://heating.danfoss.com/PCMPDF/VDKTV202_Apex20.pdf The Controllerin the ECL Apex 20 is described this way in the document:Saia-Burgess: PCD2.M5540 equipped with one G4 I/O module ECL Apex Web Panel Saia-Burgess: PCD7.D457STCF Micro-Browser Panel There are "easy" ways to connect a Saia-Burgess controller to a S7 PLC, namely Profibus-DP, using a PCD3 Profibus card. But you will need the programming software of the Saia-Burgess controller to configure the Profibus link. Look it up on the forum, there have been some threads on the subject (use the search box at the right of this page). If you have doubts to clear up, contacts Saia-Burgess directly. Hope this helps, Daniel Chartier |
7/3/2011 8:31 PM | |
Posts: 947 Rating:
|
Hi aurel18 |
Follow us on