Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
3 Entries
| 4/20/2009 8:28 AM | |
|
Posts: 3 Rating:
|
I am replacing an old IPC with a new model but i'm not sure if WinNT can run on it and if device drivers are available for download. |
| 12/14/2011 11:51 AM | |
Joined: 1/26/2011 Last visit: 11/12/2024 Posts: 243 Rating:
|
Which is your current and which your old IPC? regards bigfoot |
| 12/16/2011 4:19 PM | |
Joined: 5/28/2008 Last visit: 12/8/2015 Posts: 901 Rating:
|
Hello, the following site give you an overview about the new IPCs. https://www.automation.siemens.com/mcms/pc-based-automation/de/industrie-pc/Seiten/Default.aspx?HTTPS=REDIR&stc=wwiia302562 regards |
Follow us on