Industry Online Support
Technical Forum
1/20/2012 3:50 PM | |
Posts: 63 Rating:
|
Hi, İ need a help. I have 3 modules which area s7 200, CP 243-1 and one RTD module. I can't communicate with CP 243-1 over PC. I changed my PG/PC interface, PC's IP adress but it couldn't work. Which adress should i give PC and CP module. Please see the attachments and show me some assistans. Thanks a lot. AttachmentDocument1.pdf (93 Downloads) |
1/24/2012 9:15 AM | |
Posts: 2930 Rating:
|
Hi, cpmplete your S7-200 Program including IT-wizard and download with MPI/PPI/DP. Then you should be able to communicate via the CP. Hope this helps |
Follow us on