Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

problem in message and alarms in simatic tdc

Created by: vijay1313 at: 5/21/2012 9:25 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/21/2012 9:25 AM	Rate (0)
vijay1313 Advanced Member Joined: 5/21/2012 Last visit: 9/22/2020 Posts: 41 Rating: (0)	Hi all, i have create msg block in cfc for simatic tdc and made itself a master through master=1, and also do tdc transfer..its succesfully generate delete file and new csv file and i hve also export it successfully in wincc explore through simtra..i hve do all process which listed in sop of siemence, but i cant get msg number in msg block in cfc..i hve doubt on my msg structure and area defined... this my msg structure: 'SGC not calibrated @AH@SS11@@SG3' how to create area in HMI, for ex. here SS11, here i have use this from other block which configured by siemence engineer plz help me..

Suggestion To thank

5/21/2012 9:49 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already published in the following thread msgs problem in simatic tdc. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on