Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics DCM MMC

Created by: Aruljothi at: 5/20/2012 1:08 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/20/2012 1:08 AM	Rate (0)
Aruljothi Experienced Member Joined: 12/26/2009 Last visit: 10/17/2024 Posts: 123 Rating: (3)	Dear All, Please any one help me how to download the parameter set in MMC to Drive unit. What is the procedure i need to follow other wise give me any manual which contains this datas. Thanks in Advance A.Aruljothi

Suggestion To thank Quote Answer

5/20/2012 9:42 AM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 11/10/2024 Posts: 592 Rating: (64)	Aruljothi Dear All, Please any one help me how to download the parameter set in MMC to Drive unit. What is the procedure i need to follow other wise give me any manual which contains this datas. Thanks in Advance A.Aruljothi Hi. It may be here. Chapter 8. https://support.automation.siemens.com/WW/llisapi.dll?aktprim=0&lang=en&referer=%2fWW%2f&func=cslib.csinfo&siteid=cseus&treeLang=de&groupid=4000003&extranet=standard&viewreg=WW&nodeid0=52233399&objaction=csopen

Suggestion To thank Quote Answer

5/20/2012 9:52 PM	Rate (0)
Graeme Platinum Member Joined: 6/4/2008 Last visit: 11/10/2024 Posts: 1503 Rating: (325)	Yes, see section 9.1.4 (Page 271)Memory Card Functions Regards, Graeme

Suggestion To thank Quote Answer

5/22/2012 8:37 AM	Rate (0)
Aruljothi Experienced Member Joined: 12/26/2009 Last visit: 10/17/2024 Posts: 123 Rating: (3)	Dear All, Thanks for your valuable support Thanks by A.Aruljothi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_DCM

Follow us on