Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

@PL and @PG faceplate, problem with OnLine trend

Created by: manic at: 4/4/2007 12:50 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/4/2007 12:50 PM	Rate (0)
manic Posts: 2 Rating: (0)	Hi all, I have following problem. I was created my function blocks on AS and OS server (PCS7 6.1 SP1). I have a problem with online trend. In @PG_ and @PL_ faceplate, there is component "TrendFunktionen" withproperty "ReturnPath", where is a tag assignment for online trend. Problem is, that assignment is not working correctly. I had always problems with this, because old assignment was active and new assignment was not working. During search ofproblem sollution, I changed a property name to "ReturnPath1" and in PCS7_Trend_V6 global script the relevant part of script and this was working fine. My question is, where are stored tags names, which are showing in the online trend of PCS7 blocks like CTRL PID of MEAS_MON? Thanks for tips Marian
manic Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/4/2007 5:11 PM	Rate (0)
Freddy Experienced Member Joined: 9/13/2005 Last visit: 11/18/2019 Posts: 86 Rating: (10)	manic Hi all, I have following problem. I was created my function blocks on AS and OS server (PCS7 6.1 SP1). I have a problem with online trend. In @PG_ and @PL_ faceplate, there is component "TrendFunktionen" withproperty "ReturnPath", where is a tag assignment for online trend. Problem is, that assignment is not working correctly. I had always problems with this, because old assignment was active and new assignment was not working. During search ofproblem sollution, I changed a property name to "ReturnPath1" and in PCS7_Trend_V6 global script the relevant part of script and this was working fine. My question is, where are stored tags names, which are showing in the online trend of PCS7 blocks like CTRL PID of MEAS_MON? Thanks for tips Marian Hi Marian, the tags are read from the corresponding block icon! The Block Icon has a property "ReturnPath" where you specify the tags to be displayed and the color of the trendline. Please see following manual for the syntax of ReturnPath http://support.automation.siemens.com/WW/view/en/15230210 Chapter 2.1.7
	Best Regards - Mit freundlichem Gruß - yoroshiku onegaisimasu - Sincères salutations -Freddy- [8)]
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on