Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Area Pointer for Date and Time in TP170B - WinCC Flexible 2005

Created by: mbn at: 10/5/2005 4:04 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/5/2005 4:04 PM	Rate (0)
mbn Regular Member Joined: 9/29/2005 Last visit: 11/14/2024 Posts: 25 Rating: (0)	Hello I have a problem with setting the date and time in a TP170B. I use WinCC Flexible 2005. I have done this before but with protool with out any problems. Now I set up a area poiter for "this connection" in WinnCC Flexible 2005, but It will not adjust the date and time in the windows CE. I have to do that manually. Is it wrong setting it up this way? and do I need to do something else to make it work. I had the same problem with WinCC Flexible 2004, so It has nothing to do with that, I must do something wrong. If someone have experience with this please let me know Brg. Morten

Suggestion To thank Quote Answer

10/13/2005 1:09 PM	Rate (0)
Zwilling Posts: 10 Rating: (0)	Hello You can look and the following links for more information to WinCC flexible and the area pointer date and time. http://support.automation.siemens.com/WW/view/en/19355865 http://support.automation.siemens.com/WW/view/en/19353440 With a TP170B, it is also possible to realize the Timesynchronisation, which is described for the TP170A.
Zwilling Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on