Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

2D-Line with PTO?

Created by: michaeln at: 12/4/2012 11:27 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/4/2012 11:27 AM	Rate (0)
michaeln Regular Member Joined: 6/2/2010 Last visit: 9/22/2022 Posts: 10 Rating: (0)	Hello, is it possible to drive in 2 Axis simultaneous with the S7-1200 PTO function so that they describe together a line in the plain? I think about to calculate the way, both axis have make, is no problem. Then the speed they have to make. But my opinion the time for acceleration and deceleration is the problem. Can i control the PTO parameters like acceleration from the program? Or are there other problems? Best regards Michael

Suggestion To thank Quote Answer

12/4/2012 3:02 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	michaeln Hello, is it possible to drive in 2 Axis simultaneous with the S7-1200 PTO function so that they describe together a line in the plain? I think about to calculate the way, both axis have make, is no problem. Then the speed they have to make. But my opinion the time for acceleration and deceleration is the problem. Can i control the PTO parameters like acceleration from the program? Or are there other problems? Best regards Michael Hello Michael, Have a look on this. This may help you. Motion Control in S7-1200 Motion Control Instructions in S7-1200
	Like it? Rate it!
Suggestion To thank Quote Answer

12/11/2012 3:19 PM	Rate (0)
Jr_Jrsolutions_BR Posts: 38 Rating: (0)	Hello I need understand , you need make a interpolation for two axis or you need the control separate for two axis and sincronization both. Nilton Junior
Jr_Jrsolutions_BR Posts: 38 Rating: (0)
Suggestion To thank Quote Answer

12/11/2012 3:21 PM	Rate (0)
Jr_Jrsolutions_BR Posts: 38 Rating: (0)	Hello You need interpolation for tow axis or the control separate but with the sincronization Nilton Junior
Jr_Jrsolutions_BR Posts: 38 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on