Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

warnings when compiling in CFC editor

Created by: chombane at: 3/19/2013 2:56 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

3/19/2013 2:56 PM	Rate (0)
chombane Experienced Member Joined: 2/28/2010 Last visit: 9/30/2024 Posts: 55 Rating: (0)	Hi all, We are using PCS7 v7.1 sp3 with Cemat 7.0, now every time I compile before downloading in CFC editor I get these warnings that the PIDs are not installed in a cyclic interrupt OB. How do I install them in a cyclic interrupt OB? Please help! Attachment Warnings.JPG (83 Downloads)

Suggestion To thank Quote Answer

3/19/2013 3:48 PM	Rate (0)
mark1507 Platinum Expert Joined: 6/23/2008 Last visit: 11/7/2024 Posts: 1168 Rating: (283)	Hi, I guess sombody deleted them from the processing order by mistake. Just find every block which is listed in log in the processing order (for example in OB100) and 'drag and drop' it to the group in one of the cyclic OBs (for example the group where the other blocks from the same chart are in). But when using 'drag and drop' press "CTRL" ... the block (call) will be copied then (not moved). Regards...
	Last edited by: mark1507 at: 3/19/2013 7:21 PM "Expert" does not necessarily mean Siemens employee. Please cross-check your requirements always with official Siemens documentation. Also "Experts" are pleased about feedback. Please don't send support requests as PM. Questioners who don't follow up their thread will be put to my list of users to be ignored.
Suggestion To thank Quote Answer

3/20/2013 8:07 AM	Rate (0)
chombane Experienced Member Joined: 2/28/2010 Last visit: 9/30/2024 Posts: 55 Rating: (0)	Thanks, I copied them in cyclic interrupt OB33 but then, errors and the same warnings came up! Please help!

Suggestion To thank Quote Answer

3/20/2013 8:57 AM	Rate (0)
chombane Experienced Member Joined: 2/28/2010 Last visit: 9/30/2024 Posts: 55 Rating: (0)	Mark1507, I have managed to clare the warnings, thanks!

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users mark1507 O_Moderator

|

Share this page:

Share this page on...

Follow us on