Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

VBScript in WinCC Flexible

Created by: salrandazzo at: 11/11/2005 6:22 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/11/2005 6:22 PM	Rate (0)
salrandazzo Posts: 57 Rating: (8)	Hello everybody! I'm new using WinCC Flexible (WccF). Coming from a previous experience witn ProToolPro, the switch is easy enough. Problem is with VBScript. Documentation isn't enough. There is no object map and properties of objects that can be used with VBScripts. Examples are almost not existent. Where could I find more information and examples about using VBScripts in a WinCC Flexible environnement? Thanks a lot! Salvatore Randazzo
salrandazzo Posts: 57 Rating: (8)
Suggestion To thank Quote Answer

11/12/2005 10:25 AM	Rate (0)
Husam Posts: 101 Rating: (11)	Hello sarlandazzo, I am not using WinCC Flexible, but using WinCC 6.. However, VBScripting is the same. I tried to attach a pdf file on VBscripts in WinCC but couldn't because the file size exceeds the max attachment size limit.. Send me your e-mail address on husamothman@gmail.com and i will forward it to you.. Regards.
Husam Posts: 101 Rating: (11)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on