Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Which Y-link for one of our PCS7 project

Created by: JD_techflirt at: 8/12/2013 8:29 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/12/2013 8:29 AM	Rate (0)
JD_techflirt Posts: 95 Rating: (1)	Hi All, We have to select Y-link for one of our PCS7 project. Which Y-link should we select?? 6ES7 197-1LA04-0XA0? or 6ES7 197-1LA11-0XA0 According to PCS7 manual we should use 2nd one. but why? and y cant we use frst one? Regards, JD
JD_techflirt Posts: 95 Rating: (1)	Last edited by: CS Moderator at: 8/13/2013 9:56 AM new subject after splitting from /tf/WW/en/Posts/39588#top
Suggestion To thank

8/13/2013 10:03 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/8/2024 Posts: 4111 Rating: (195)	closed cause question published twice. The second thread with this question got the subject not able to configure Y-LINK in the HW Config and is published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on