Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to update panel MP370

Created by: FRS2010 at: 10/30/2013 7:23 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/30/2013 7:23 PM	Rate (0)
FRS2010 Posts: 12 Rating: (0)	good evening I try to install an MP370 operator panel when I try to load the program, it asks me an update. when I try to update it is blocked, and since I do not know what to do; thank you for helping me to update it
FRS2010 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

10/30/2013 8:32 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, Have a look at: How do you do an operating system update (OS update) on operator panels? Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

10/31/2013 1:31 PM	Rate (0)
FRS2010 Posts: 12 Rating: (0)	hello the problem is that when the update of MP377, there occurred an interruption of electricity that cause the loss of the Windows CE operating system. the console does not display anything. how to inject him with a new operating system Windows CE?
FRS2010 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

10/31/2013 3:47 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, In that case you will have to perform an OS update with the option "Reset to factory settings" The earlier mentioned link descripes how to do. You have to use Prosave for that, so read the Prosave part. I believe you need a RS232/PPI multi master cable. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on