Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Add on software

Created by: krisvold at: 8/16/2007 2:40 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/16/2007 2:40 PM	Rate (0)
krisvold Posts: 4 Rating: (0)	Does anyone know if the add on software for dividing one screen into four is available for PC S7 version 7? I know it exist for version 5 and 6. regards Knut R.
krisvold Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

8/16/2007 3:24 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi do you mean those mutliple screens provided by project editor in PCS7? Or what´s the name of your addon? => this is available in V7 too nemo
Nemo Posts: 3149 Rating: (171)	Last edited by: Nemo at: 16.08.2007 15:25
Suggestion To thank Quote Answer

8/16/2007 3:42 PM	Rate (0)
jspino Posts: 37 Rating: (2)	Hello, Are you referring to the 4-quadrant representation of process images? If so, this can be found in the PCS 7 Add-on catalog ST PCS7.1 - April 2007 section 5 http://pcs.khe.siemens.com/efiles/pcs7/pdf/76/kg_stpcs7addon_en.pdf 4-quadrants: 4-quadrant representation of process images 4-quadrants: 4-quadrant representation of process images
jspino Posts: 37 Rating: (2)
Suggestion To thank Quote Answer

8/16/2007 3:57 PM	Rate (0)
krisvold Posts: 4 Rating: (0)	Yes that is correct but the catalogue doesn't mention version 7. I was also told that V7 doesn't support this add-on and so I wanted to double check that statement. This is what the catalogue says. 4-quadrant representation of process images for SIMATIC PCS 7 V5.x, V6.0 and V6.1; (OS Single Station or OS Client) regards Knut Risvold
krisvold Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on