Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC V6, fast archiving

Created by: Feffe at: 10/6/2005 2:21 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/6/2005 2:21 PM	Rate (0)
Feffe Posts: 3 Rating: (0)	Hi, Is there anybody who have experience of fast logging to WinCC. My customer want to sample 30-40ms in the S7-PLC for a short timeinterval (10-15sec) and then send the data to WinCCs database, with timestamp from the PLC. Thank you in advance Feffe
Feffe Posts: 3 Rating: (0)	Last edited by: Feffe at: 10/6/2005 2:33 PM
Suggestion To thank Quote Answer

10/6/2005 4:24 PM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	There are blocks available for the S7-300 and 400 that will transfer the data up to WinCC. This faq makes a good starting point http://support.automation.siemens.com/WW/view/en/21738814 Hope this helps, Salma

Suggestion To thank Quote Answer

10/10/2005 5:41 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hello Feffe, perhaps will the following PCS7-FAQ/Manual answer some of your questions, if you are using PCS7 and need a 10 ms time stamp....: http://support.automation.siemens.com/WW/view/de/15389927 http://support.automation.siemens.com/WW/view/de/15231179 Best regards, Nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

12/7/2005 3:30 PM	Rate (0)
Marcio R. Santos Silver Member Joined: 12/5/2005 Last visit: 9/25/2024 Posts: 239 Rating: (9)	I already used de AR_SEND, and I liked. Is very easy. Exists many possibles configurations. See the documentation of WinCC and Step 7. I can send anproject. This project has the configurarion in the WinCC and Step 7. This project also has an example of use of ALARM_8.
	Last edited by: Marcio at: 12/7/2005 3:41 PM Márcio Santos www.marcioroberto.wordpress.com
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on