Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Comunication Modbus TCP with CP343

Created by: C. Reyes at: 3/25/2014 10:00 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/25/2014 10:00 AM	Rate (0)
C. Reyes Posts: 33 Rating: (0)	Hello! I'm trying to comunicate by ModbusTCP with a CP "6GK7 343-1 EX10-0XE0", I don't know if this CP supports Modbus TCP. I transfer the program, and the "SF" led is off. The led "LINK" is on, the led "RX/TX" is flashing and the led "RUN" is on. But the comunication is not established... And if somebody can explain me how works in ModbusTCP the memory areas? Thankss
C. Reyes Posts: 33 Rating: (0)	Last edited by: C. Reyes at: 3/25/2014 10:10 AM
Suggestion To thank Quote Answer

3/25/2014 11:21 AM	Rate (0)
Wüstenräuber Gold Expert Joined: 10/3/2008 Last visit: 8/28/2024 Posts: 961 Rating: (124)	Hi, which modbus product do you use? And which STATUS is shown on the modbus block? Wüstenräuber

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

ModbusTCP

Follow us on