Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

communications problems pcs7 and sitrans p DS III device

Created by: gogolgrind at: 7/11/2014 3:07 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/11/2014 3:07 PM	Rate (0)
gogolgrind Posts: 6 Rating: (0)	Hi, I am a student and I internships in siemens lab of my university. I have some problems with Simatic PCS 7. First problem: I drag and drop sitrans p DS III device into hardware config and click on pictogram, it gives message "unable to connect via profibus...". It is software or hardware connecting problem? But on the instrument and on the communications devices there are indications. Second problem: [snip] ... Thanks in advance, sorry for my bad english. P.s. if it necessary I'll find detailed hardware specifications Attachment error.jpg (196 Downloads)
gogolgrind Posts: 6 Rating: (0)	Last edited by: CS Moderator at: 7/14/2014 9:39 AM new suject after splitting. Second could be found here: /tf/WW/en/Posts/111452#top
Suggestion To thank Quote Answer

7/30/2014 12:05 PM	Rate (0)
jumo Bronze Member Joined: 11/16/2012 Last visit: 3/22/2024 Posts: 227 Rating: (31)	Hi gogolgrind, have you found a solution for your problem in the meantime? Did you download your HW Config before you inserted the sitrans? Does the connection between CPU and IM-153 work? Regards jumo

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on