Navigation

1PH7 SPINDLE MOTOR IN SERVO LOCK

Created by: DHINAKARAN at: 8/11/2014 4:40 AM (1 Replies)

8/11/2014 4:40 AM	Rate (0)
DHINAKARAN Experienced Member Joined: 10/25/2011 Last visit: 11/6/2024 Posts: 41 Rating: (0)	Hi Experts, In one of our Milling Machine (802D CNC control) for past 3 weeks we faced new problem. After execution of M19 to M05 command the spindle is in servo lock it can't be rotate by hand but the HMI screen changed to spindle mode.. Any suggestion Regards, Dhina

Suggestion To thank Quote Answer

8/12/2014 6:38 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Hello, Have you checked PLC logic? Just try M18, then M05 & check.

Suggestion To thank Quote Answer