Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Rf260r red light indicator blinks 21 times

Created by: mda_qubiqa at: 10/13/2014 11:02 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/13/2014 11:02 AM	Rate (0)
mda_qubiqa Posts: 5 Rating: (0)	Hello I have a PLC system with S7-317-2 DP/PN, communication module RF180C and a reader RF260R to read transponder type MDS D100. I want to read the transponder tag via profinet. I have used the example with FB45 on the DVD that came with the system. I have set up the hardware and the communication to CM RF180C seems to be ok (green light on module ok), but reader RF260R blinks 21 times red light. In the status I have an error code error_moby = 15 after init I have checked the input parameters and cant find any error, and the hardware configuration only have the I/O address of the RF180C that is used in the parameters of FB45. My start address is 256 as in the example. So what can be wrong??
mda_qubiqa Posts: 5 Rating: (0)	Last edited by: mda_qubiqa at: 10/13/2014 11:06 AM
Suggestion To thank Quote Answer

10/13/2014 3:17 PM	Rate (0)
Owei Gold Expert Joined: 10/1/2013 Last visit: 5/8/2024 Posts: 605 Rating: (71)	Hi, could you tell us the input parameters you configured? Either its the wrong I/O-address or a wrong input parameter.

Suggestion To thank Quote Answer

10/13/2014 4:09 PM	Rate (0)
mda_qubiqa Posts: 5 Rating: (0)	Hello Owei I have solved the problem with the Siemens support guys. It was a parameter field_ON_time that was wrong. Now its reading/writing ok. But thanks for your respons. /michael
mda_qubiqa Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on