Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MasterDrives problem

Created by: Andrey67 at: 1/19/2016 5:25 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/19/2016 5:25 PM	Rate (0)
Andrey67 Member Joined: 9/14/2015 Last visit: 10/31/2024 Posts: 1 Rating: (0)	Hi all! Help solve the problem, please. There is an old machine, head unit C7-626P/ProfiBus DP master. Connected to the network five Simovert MasterDrives. Archive for machine no. Downloaded from MasterDrives configuration. One drive started to work. The others don't have. How to write a telegram from the PLC? Archive drives attached. With Respect, Andrey. Attachment Simovert.zip (296 Downloads)

Suggestion To thank Quote Answer

1/20/2016 8:32 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/14/2024 Posts: 8092 Rating: (878)	Hello, From the attached backup only motor 74XA4 works & other 74XA1.. 74XA3 does not get ON commands. So please check the signals. BTW how is it controlled, thru PLC or any other controller?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on