Tip for creating a new thread

better sir

best regard

ali

Hello dimtsio,

Steps to create a new thread:

1. Go to the conference where you want to create a thread
2. Click "New topic"

I have attached a picture with this two steps.

Best regards
Min_Moderator

I hope all new forum members read this post before post your question. we have lots of question from new member. they just register and ask question in their own way.

!! Attention friends, here is Siemens technical Forum.  NOT machine builder forum, some question may very easy to find help in   "machine builder forum" such as DMG, INDEX, and so on.

Suggestion again for new member read this post before post your question--If you want to get fast response and better help. Please! Please provide MLFB number for your system.

MLFB (= Maschinenlesbare Fabrikatebezeichnung (Machine-Readable Product Designation))

Simply means--Article number = order number. Example in SINUMERIK AND SIMODRIVE, SINAMICS---MOSTLY STARTING WITH "6" such as 6SN1118-0DM23-0AA1 --611D control card; 6SN1123-1AA00-0AA1 15A drive module ; 6SLxxxx. 6FX....;6FC.....

here is remote help , you can not just write in your way--think the members want to help you will automatic know your system. No, Even Siemens specialists also need your detail information before give you help.

----add o July 25-2016---

New forum friends, I found recently many new post question, cannot get in time answer due to lack of detail information--Please if you don't know Siemens parts#, you need at least post one or 2 pictures of your system. here is free remote help, the more information you post the better and faster answer you will get.

I post an example there --it is 840D and 611D system